55
VQT1H62
Recording
Reduces the phenomena where human eyes
become red from flashes.
Press the MENU button, then select
[PICTURE]
#
[RED EYE]
#
[ON] and
press the cursor button.
To cancel the red eye reduction function
Press the MENU button, then select [PICTURE]
#
[RED EYE]
#
[OFF] and press the cursor
button.
≥
The flash is activated 2 times. Do not move
until the second flash is finished.
≥
Use this when you take pictures of people in
dark places.
≥
Red eye phenomenon may appear depending
on the recording conditions.
Press the MENU button, then select
[PICTURE]
>
[FLASH LEVEL]
#
desired item and press the cursor
button.
[
ß
j
]:
If the brightness is too high.
[
ß
d
0]: In normal recording
[
ß
i
]:
If the brightness is insufficient.
By focusing only on the subject and blurring the
background, the image can be impressive.
The unit can focus on the subject at a distance of
approx. 50 cm (20
q
).
¬
Rotate the mode dial to select
.
1
Press the cursor button. Then
move the cursor button down to
display the icon shown in the
illustration.
2
Move the cursor button right to
select [
].
≥
If the magnification is 10
k
or less, then it is
automatically set to 10
k
.
To cancel the tele macro function
Select [
] again.
≥
If a sharper focus cannot be achieved, adjust
the focus manually. (
l
60)
≥
In the following cases, the tele macro function
is canceled.
j
The zoom magnification becomes lower than
10
k
.
j
The power is turned off or the mode dial is
operated.
Red eye reduction function
To adjust the brightness of the
flash
Tele macro function
This is for close-ups bringing only
what you want to record into focus.
VQT1H62_ENG_PP.book 55 ページ ２００７年７月１７日 火曜日 午後５時４４分
