26
VQT2M75
Important:
While the DC cable is connected to the AC adaptor, the battery will not charge.
≥
Do not use the AC cable with any other equipment as it is designed only for this unit.
Also, do not use the AC cable from other equipment with this unit.
1
Connect the AC cable to the AC adaptor and the AC outlet.
2
Connect the DC cable to the AC adaptor.
3
Connect the DC cable to the DC input terminal [DC IN].
≥
When removing the AC adaptor, be sure to hold down the power button until the status
indicator goes off. Then remove the AC adaptor.
Battery capacity indication
≥
The display changes as the battery capacity reduces.
#
#
#
#
If there is less than 3 minutes remaining, then
will become red. If the battery
discharges, then
will flash.
≥
The remaining battery capacity is displayed when using the Panasonic battery that you
can use for this unit. The actual time can vary depending on your actual use.
≥
If the actual remaining time exceeds 9 hours 59 minutes, the indication will stay green
and will not change until the remaining time falls below 9 hours 59 minutes.
≥
When using the AC adaptor or batteries made by other companies, the remaining
battery capacity will not be shown.
Connecting to the AC outlet
DC IN
A
DC output terminal
B
DC input terminal
Insert the DC cable matching the
[
] mark of the DC input terminal.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 26 ページ ２０１０年２月２３日 火曜日 午前１０時３４分
