31
Adjusting the white shading
(continued)
Select the file No.
Give a title to the selected file.
5
Turn the JOG dial button to move the arrow
(cursor) to the “TITLE : ” item.
< LENS FILE >
FILE SELECT :1
READ
WRITE
RESET ALL
n
TITLE:
1:
5:
2:
6:
3:
7:
4:
8:
6
When the JOG dial button is pressed, the arrow
(cursor) moves to the title input area, and the input
mode is established.
< LENS FILE >
FILE SELECT :1
READ
WRITE
RESET ALL
m
TITLE:
1:
5:
2:
6:
3:
7:
4:
8:
10
When the title has been input, turn the JOG dial
button to move the arrow (cursor) to the “:”
position.
< LENS FILE >
FILE SELECT :1
READ
WRITE
RESET ALL
m
TITLE:
222222222222
1:
5:
2:
6:
3:
7:
4:
8:
2
Turn the JOG dial button to move the arrow
(cursor) to the FILE SELECT item
4
Press the JOG dial button to enter the file number.
3
Press the JOG dial button and the file number will
flash. Turn the JOG dial button to select the file (1
to 8) to be recorded.
< LENS FILE >
FILE SELECT :1
READ
WRITE
RESET ALL
n
TITLE:
1:
5:
2:
6:
3:
7:
4:
8:
7
Press the JOG dial button again and turn it until the
character to be set is displayed.
When the button is turned, the character displayed
is switched in the following sequence:
Space:
)
7
letters: A—Z
7
numbers: 0—9
7
symbols: ’, >, <, /, –, . , x
8
Press the JOG dial button to enter the character.
9
Turn the JOG dial button to move the arrow
(cursor) to the next position (right), and repeat
steps
7
and
8
to set the characters (maximum of
12).
Writing the white shading adjustment
values and flare adjustment values in the
internal memory
Up to eight white shading adjustment values can be
stored in the internal memory. Since they are stored
at the same time as the flare adjustment values, it is
recommended that the FLARE screen of CAM MAIN
MENU 4 be opened and the flare adjusted before
storing these values in the internal memory.
1
Perform the menu operations (pages 86 to 88),
and display the “LENS FILE” screen of FILM
(CAM) MAIN MENU 3.
02. 英(P26-88) 05.5.18 10:42 ページ31
