Panasonic HFQ EE26, Specification

– EE26 –

Design, Specifications are subject to change without notice.  Ask factory for technical specifications before purchase and/ or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.

Aluminum Electrolytic Capacitor/HFQ

HFQ

A

Series:

Type  :

 -55  to   + 105

°

C

6.3     to   63 V .DC

 6.8  to  15000 µ F

±20 % (120Hz/+20

°

C)

After following life test with DC voltage and +105±2

°

C  ripple current value applied. (The sum of

DC and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall
meet the limits specified below.

After storage for 1000 hours at +105±2

°

C with no voltage applied and then being stabilized at

+20

°

C, capacitor shall meet the limits specified in “Endurance”.

I 

<

  0.01 CV or 3 (µ A) after 3 minutes

Add 0.02 per 1000µF for products of 1000µF or more

(max.)

(120Hz /+20

°

C)

Impedance at -10

°

C, 100kHz 

<

 200 % of initial specified value at +20

°

C,100kHz.

(Impedance ratio at 100kHz)

Duration:1000 hours (

φ

4 to 8), 2000 hours (

φ

10 to 18) post test requirements at +20

°

C

(

>

6.3mm dia)

L

L

<

16:L+1.0 max

φ

d±

0.05

14 min

 min

φ

D+0.5 max

φ

10

<

P

±

0.

5

φ

D+0.5 max

φ

8

>

P

±

0.

5

L

>

20:L+2.0 max

Body Dia. 

φ

D

Body Length  L

Lead Dia. 

φ

d

Lead space P

15 to25

30 to 40

  0.45    0.5     0.5     0.6     0.6      0.6     0.8       0.8    0.8

  1.5      2       2.5     3.5       5        5       5       7.5    7.5

4            5         6.3         8         10             12.5              16         18

■

 Frequency correction factor for ripple current

  W.V.
(V.DC)

60        120         1k       10k      100k

Frequency(Hz)

0.55      0.65       0.85      0.90       1.0

6.3  to  63

Capacitance
      (µF)

6.8 to     330

  390      to   1000
1200      to   2200
2700      to 15000

0.75      0.80       0.90      0.95       1.0
0.80      0.85       0.95      1.00       1.0

0.70      0.75       0.90      0.95       1.0

E          C          A                                   F          Q

Discontinued

Radial lead type

■ 

Features

Endurance :105

°

C 1000 to 2000h

Low impedance (1/3 to 1/4 of Series HFE)

■

Specification

Operating Temp. Range

Rated W.V. Range

Nominal Cap. Range

Capacitance

DC leakage current

W.V.     6.3      10      16      25     35       50     63
tan 

δ

   0.22   0.19   0.16   0.14   0.12   0.10   0.08

Characteristics at Low
Temperature

Shelf life

■ 

Explanation of Part Number

R.W.V. code

Capacitance code

■ 

Dimensions in mm (not to scale)

Safety vent

Vinyl sleeve

Dissipation Factor

Endurance

Capacitance change
D.F.
DC leakage current

±20% of the initial measured value

<

200% of the initial specified value

<

 initial specified value

Product Code

Series Code

Option