5.12 Hysteresis Setting
■
Overview
A hysteresis is the width of distance where the control output changes from OFF to ON or from
ON to OFF.
When a sensing workpiece is located near the threshold value, increasing the value of
hysteresis makes output operations stable.
■
Setting method
● The hysteresis cannot be set to a value that is equal to or greater than half of the shift
amount.
● The hysteresis cannot be set to a value that is equal to or greater than the difference
between the maximum displayable measured value (in consideration of the zero set
setting state) and the threshold value.
● When making zero set setting, set the threshold value and then reset the hysteresis value as
necessary.
Setting item
Set value
Default value
Hysteresis
1 to 1,500
30
5.12 Hysteresis Setting
5-32
WUME-HGF1UM-2
Ramco Innovations www.ramcoi.com Got Questions? Phone 800-280-6933 Email nsales@ramcoi.com