4
URL : http://panasonic-electric-works.net/sunx
Overseas Sales Division (Head Office)
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Phone: +81-568-33-7861 FAX: +81-568-33-8591
Europe Headquarter: Panasonic Electric Works Europe AG
Rudolf-Diesel-Ring 2, D-83607 Holzkirchen, Germany
Phone: +49-8024-648-0
7
Specifications
The following measurement conditions apply unless otherwise specified:
●
Power voltage: 24V DC
●
Ambient temperature: 20°C
● Sampling cycle: 500μs
●
Average number of sampling times: 1024 times
●
Measurement object: white ceramic
Model no.
standard type
Hl-G103-a-c5
Hl-G105-a-c5
Hl-G108-a-c5
Hl-G112-a-c5
Multifunction type
Hl-G103-s-J
Hl-G105-s-J
Hl-G108-s-J
Hl-G112-s-J
Measurement method
Diffuse reflection
Measurement center distance
30mm
50mm
85mm
120mm
Measuring range
±4mm
±10mm
±20mm
±60mm
Beam source
Red semiconductor laser class 2 (JIS/IEC/FDA laser notice No. 50)
Max output: 1mW, Emission peak wavelength: 655nm
Beam dimensions
1
0.1×0.1mm
0.5×1mm
0.75×1.25mm
1.0×1.5mm
Beam receiving element
CMOS image sensor
resolution
0.5μm
1.5μm
2.5μm
8μm
linearity
±0.1% F.S.
temperature characteristics
±0.08% F.S./°C
supply voltage
24V DC ±10% including ripple 0.5V (P-P)
current consumption
100mA max.
sampling cycle
200μs, 500μs, 1ms, 2ms
analog output voltage
Output range: 0 to 10.5V (normal), 11V (at alarm)
Output impedance: 100Ω
analog output current
Output range: 3.2 to 20.8mA (normal), 21.6mA (at alarm)
Load impedance: 300Ω max.
out1
out2
out3
Judgment output or alarm output (switchable)
NPN open-collector transistor/PNP open-collector transistor (switchable)
settings for nPn
●
Maximum sink current: 50mA
●
Applied voltage: 3 to 24V DC (between output and 0V)
●
Residual voltage: 2V max. (at sink current of 50mA)
settings for PnP
●
Maximum source current: 50mA
●
Residual voltage: 2.8V max. (at source current of 50mA)
output operation
Open when the output is ON.
short-circuit protection
Incorporated (Auto-reset)
nPn/PnP type switching input
At 0V: NPN open-collector output
At supply voltage of 24V DC: PNP open-collector output
timing input
NPN type operation: ON when connecting or connected to 0V (depending on settings)
PNP type operation: ON when connecting or connected to positive terminal of external power supply (depending on settings)
Multifunction input
Zero set, Reset, Memory change, Teaching, Save, or Laser control depending on input time.
NPN type operation: Depending on time to connect 0V
PNP type operation: Depending on time to connect positive terminal of external power supply
communications interface
(multifunction type)
RS422 or RS485
Baud rate: 9,600/19,200/38,400/115,200/230,400/460,800/921,600bps
Data length: 8 bits; stop bit length: 1 bit; parity check: none; BCC: yes; end code: CR
laser radiation indicator
Green LED: ON when laser radiation is being emitted
alarm indicator
Orange LED: ON when measurement is disabled due to insufficient amount of light
output indicator
Yellow LED (No. of indicators: 3): ON during output
Digital display
Red LED for sign and 5-digit display
Degree of protection
IP67 (except connector)
Pollution degree
2
Insulation resistance
20MΩ min. at 250V DC megger (between charged parts and casing)
Dielectric withstand
Endurance: 10 to 55Hz (at 1-minute cycle), 1.5mm double-amplitude
Vibration resistance
1000V AC for 1 min. (between charged parts and casing)
shock resistance
500m/s
2
three times each in X, Y, and Z directions
ambient illumination
2
3,000lx max. (illumination level of light receiving surface under incandescent light)
ambient temperature
-10°C to 45°C (No dew condensation or icing allowed);
At storage: -20°C to 60°C
ambient humidity
35% to 85%RH, At storage: 35% to 85%RH
altitude
2000m or less above sea level
Material
Casing: PBT, front cover: acrylic, cable: PVC
cable length
Standard type: 5m; multifunction type: 0.5m
cable extension
Multifunction type: extendable to 20m with an optional extension cable (sold separately)
Weight (standard type)
Approx. 70g (without cable), approx. 320g (including cable), and approx. 380g (with packing)
Weight (multifunction type)
Approx. 70g (without cable), approx. 110g (including cable), and approx. 160g (with packing)
accessory
Laser warning label: 1 set
applicable standards
Conforming to EMC Directive
1.
Inhomogeneous surfaces may reflect the laser beam such that the receiver perceives an erroneous shift in light intensity. For more details on beam dimensions, please refer
to the HL-G1 User’s Manual.
2. Variance is ±0.1% F.S. or less depending on the ambient illuminance.