22
VQT2Z95
Recording/Playback
Recording
≥
This unit will perform automatic recording. Auto focusing, auto white
balancing, and electronic stabilizer
*
will function during the recording.
* The electronic stabilizer will not function when recording still pictures
or using digital zoom.
1
Press the Motion picture button to start recording.
≥
When you begin recording,
;
changes to
¥
.
2
Press the Motion picture button again to pause recording.
≥
The images recorded between pressing the Motion picture button to start
recording and pressing it again to pause recording become one scene.
≥
In the following cases, the countdown until the recording is stopped will start from
approx. 30 seconds and the recording will stop when the display reaches 0 second.
j
When the total of the capacity of the SD card is about to be used during the recording.
j
When the recording time reaches near the maximum continuous
recordable time for a single scene. (
l
65)
≥
Please refer to page 65 for details on continuous recordable time for a single scene.
≥
Maximum number of recordable scenes on a single SD card is 8999100.
∫
About the screen display when recording motion pictures
:
Recording mode
¥
:
Recording motion picture
;
:
Recording pause
01h30m:
Remaining time for motion picture
recording
00m00s:
Elapsed recording time
≥
“h” is an abbreviation for hour, “m” for minute
and “s” for second.
Recording motion pictures
About the compatibility of the recorded motion pictures
≥
They are not compatible with devices other than those that support
MP4. Images cannot be played with equipment that does not
support MP4. Confirm that your equipment supports MP4 by
referring to the operating instructions.
≥
There are some cases where the recorded motion pictures cannot
be played back, even if the device supports MP4. In such cases,
play the recorded motion picture with this unit instead.
00m00s
00m00s
00m00s
HM-TA1_PP-VQT2Z95_mst.book 22 ページ ２０１０年７月１４日 水曜日 午後５時５０分
