24
VQT3N87
∫
To return the USB terminal to its original position
≥
When pressing the USB terminal with your fingers, press slowly and carefully.
1
Press the USB Latch
C
.
2
While pressing on the USB Latch
C
, press the USB terminal with
your finger.
≥
Release your finger from the USB Latch
C
, and push in the USB
terminal until it is locked.
3
Close the USB terminal cover.
4
While the USB terminal cover is closed, slide the open/close lever for
the USB terminal cover
B
toward the direction of the arrow.
5
Slide the LOCK lever for the USB terminal cover
A
to lock the open/
close lever for the USB terminal cover
B
.
1
Slide the USB Latch
A
.
2
While the USB Latch
A
is slid, press the USB terminal with your finger.
≥
Release your finger from the USB Latch
A
, and push in the USB
terminal until it is locked.
3
Close the USB terminal cover.
≥
Please refer to page 82 if the status indicator flashes quickly.
≥
Do not heat or expose to flame.
≥
Do not leave unit in an automobile exposed to direct sunlight for a long
period time with doors and windows closed.
≥
If the operating time is still too short even after the battery is fully
charged, the battery has worn out and needs to be replaced. Contact
consumer support. (
l
101, 102)
≥
Operation is not guaranteed for all devices equipped with a USB terminal.
HM-TA20
HM-TA2
HM-TA20&TA2_P&PC-VQT3N87_mst.book 24 ページ 2011年4月22日 金曜日 午後12時11分