VQT3N87
29
Caution:
Check that the status indicator has gone off.
1
Open the SD card door and insert (remove) the SD
card into (from) the card slot
B
.
≥
Face the label side
C
in the direction shown in the illustration and
press it straight in as far as it will go.
≥
Press the center of the SD card and then pull it straight out.
≥
Open the SD card door after releasing the lock with the LOCK
lever for the SD card door.
2
Securely close the SD card door.
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used
on other equipment, for the first time on this unit, format the SD card.
(
l
57) When the SD card is formatted, all of the recorded data is
deleted. Once the data is deleted, it cannot be restored.
HM-TA2
Status indicator
A
≥
When this unit is accessing
the SD card, the status
indicator lights up.
≥
Insert SD card as shown in the figure.
HM-TA20
HM-TA20&TA2_P&PC-VQT3N87_mst.book 29 ページ 2011年4月22日 金曜日 午後12時11分