![background image](http://html.mh-extra.com/html/panasonic/hmwin/hmwin_user-manual_280071179.webp)
Attaching widget to buffer
Path:
AlarmHistory
widget>
Properties
pane>
Buffer
>
EventBuffer
In
Properties
pane >
Event
select the
Event Buffer
from which the alarm list is retrieved
Managing alarms at run time
When an alarm is triggered it is displayed in the Active Alarms widget where you can acknowledge and reset it. You can
filter the alarms displayed using several filters, for example you can hide not triggered alarms or show all alarms.
See
"Active Alarms widget" on page 172
for details.
IMPORTANT: The Active Alarms widget is not displayed automatically. You must add a dedicated
action that will open the page containing the alarm widget when the alarm is triggered.
Enable/disable alarms at run time
You can enable or disable the alarms at run time.
To enable an alarm select the
Enable
option in the alarm widget.
Disabled alarms are not triggered and therefore not displayed at run time.
HMWIN Studio | User Manual | v206 (2017-06-30) | EN | © 2014-2017 Panasonic Electric Works Europe AG
177
15 Alarms
Summary of Contents for HMWIN
Page 166: ...164 HMWIN Studio User Manual v206 2017 06 30 EN 2014 2017 Panasonic Electric Works Europe AG ...
Page 258: ...256 HMWIN Studio User Manual v206 2017 06 30 EN 2014 2017 Panasonic Electric Works Europe AG ...
Page 380: ...378 HMWIN Studio User Manual v206 2017 06 30 EN 2014 2017 Panasonic Electric Works Europe AG ...
Page 439: ......