Creating an indexed addressing set
Scenario
In this scenario, environment data is collected from with four rooms, each equipped with temperature, pressure, and
humidity sensors. Data is available as follows:
Room Number
Temperature
Pressure
Humidity
1
Room1-Temperature
Room1-Pressure
Room1-Humidity
2
Room2-Temperature
Room2-Pressure
Room2-Humidity
3
Room3-Temperature
Room3-Pressure
Room3-Humidity
4
Room4-Temperature
Room4-Pressure
Room4-Humidity
Using the indexed addressing feature, you can use a single table format to arrange all data in the HMI device.
Data from the three different sensors can be displayed in a single page where the room number is used as a selector
(combo box) to pick the correct set of tags.
How to create an indexed tag set
Path:
ProjectView
>
Tags
To do this you need to create an indexed tag set.
1. In the Tag Editor, define protocols and tag. Define a tag for each data to be indexed, in this example you must create
a tag for each sensor in each room.
274
HMWIN Studio | User Manual | v206 (2017-06-30) | EN | © 2014-2017 Panasonic Electric Works Europe AG
Creating an indexed addressing set
Summary of Contents for HMWIN
Page 166: ...164 HMWIN Studio User Manual v206 2017 06 30 EN 2014 2017 Panasonic Electric Works Europe AG ...
Page 258: ...256 HMWIN Studio User Manual v206 2017 06 30 EN 2014 2017 Panasonic Electric Works Europe AG ...
Page 380: ...378 HMWIN Studio User Manual v206 2017 06 30 EN 2014 2017 Panasonic Electric Works Europe AG ...
Page 439: ......