194
Menu : Menu Description Tables
The ____ in the Adjustable Range column indicates the
preset mode.
OPTION MENU
OPTION
Items/
Data Saved
Adjustable
Range
Remarks
ENG
SECURITY
ON
OFF
Select whether or not to prohibit opening
the menu screen.
ON:
Menu screen cannot be opened.
Please consult your distributor to
release the setting.
OFF:
Menu screen can be opened.
– – – – –
FRAME RATE
UB
FRM RATE
MENU
For setting the user bits to record when
the video system is set to 24P or 24PA.
For details, refer to [
Recording time code
and user bits
] (page 58).
FRM RATE:
For recording the shooting information
(frame rate etc.) of the camera.
MENU:
This follows the settings in the
UB MODE item and the VITC
UB MODE item of <TC/UB>
screen. However, the camera
recording information is always
recorded when recording in
Native mode.
– C – – –
1394 CONFIG DFLT(000)
001
:
255
This is the menu for expanding the
DVCPRO connector.
Use with DFLT in normal operation.
– C – – –
1394 GAP
COUNT
0
:
40
:
63
For setting the interval between packets.
– C – – –
AUDIO OUT
DELAY
DELAYED
THROUGH
Select whether or not to delay audio,
headphone and speaker outputs.
DELAYED:
Delay audio output in synchronisation
with video output.
THROUGH:
Output audio input without delay. This
setting prevents echo effect between
the sound source and audio output
when the sound source is near the
camera-recorder.
– C – – –
FAN MODE
OFF
AUTO
For setting the operation mode of the fan
OFF:
The fan always stops.
AUTO:
The fan will run automatically
when the temperature in the unit
increases.
Note
Once the power is turned off, this will
always be set to "AUTO" whenever the
power is turned on. If the unit is
operated as the fan stops, the
temperature in the unit will increase, and
data may not record or play back
properly. Use the unit after setting this
item to "AUTO" for normal operation.
– – – – –
AREA SETTING
Items/
Data Saved
Adjustable
Range
Remarks
AREA
SELECT
NTSC
NTSC (J)
PAL
NTSC:
Any NTSC color TV
standard other than Japan is
selected.
NTSC (J):
Japan color TV standard is
selected.
PAL:
PAL color TV standard is
selected.
– – – – –
AREA SET
―
The settings for the area selected in the
AREA SELECT item are applied. For
details, refer to [
Color TV Standard
Settings (Settings for frame frequency)
]
(page 13).
– C – – –
AJ-HPX3000G(VQT1K82-5)E.book 194 ページ 2009年11月12日 木曜日 午後8時19分