76
Adjustments and Settings for Recording : Viewfinder Screen Status Displays
15. Chromatic aberration
compensation
CAC
Displayed when chromatic aberration compensation is activated
16. Extender
EX
Lens extender used.
17. Color temperature
¢
.
¢
K
Color temperature assigned to A, B, and PRST of the WHITE BAL switch
(this is a value stored at AWB performance or a value set through the menu
option). The indication is not provided in ATW mode.
18. Filter position
1 - 4
A - D
(blink)
This indicates the position of the ND filter.
This indicates the position of the CC filter.
This indicates that the filter has not been set to a proper position.
19. Dynamic range
stretcher mode
DRS
This appears when the video level of a part with high brightness is
compressed, and the function stretching the dynamic range is selected.
20. WHITE BAL switch
position
A
B
P
WHITE BAL switch positioned at [A].
WHITE BAL switch positioned at [B].
WHITE BAL switch positioned at [PRST].
21. Stored gain
indication
6
:
/10
:
/12
:
/15
:
/20
:
Storage gain (DS.GAIN) value (when active)
22. Gain value
¢¢
dB
Current gain value.
23. Audio input channel
and level meter
- - - -
- - - - +
F
W
R
Selected channel together with its audio level.
AUDIO IN switch is positioned at FRONT.
AUDIO IN switch is positioned at W.L.(WIRELESS)
AUDIO IN switch is positioned at REAR.
24. Super black ON
B
Super black ON.
25. Super iris ON
S
Super iris ON.
26. Iris override
indication
+ +
+
– –
–
(No indication)
Correction phase of the iris override (when active)
+ + : On the open side by 1
+: On the open side by 0.5
– – : On the closed side by 1
–: On the closed side by 0.5
No indication : Standard status
27. Iris, F value
NC
OPEN
F1.7 - F16
CLOSE
Lens cable is not connected.
Lens iris is at maximum.
Lens iris value
Lens iris closed.
Note
These indications are provided when the lens is capable of indicating the iris
value. When the iris is being overridden, they blink.
28. Zoom indication
Z00 - Z99
Zoom degree is indicated. This indication is not provided for a lens that does
not return the zoom position, even if the indication is set to ON.
29. INTERVAL REC/PRE
RECORDING
information display
(blink)
(blink)
¢¢
h
¢¢
m/
¢¢
s
P-REC (blink)
P-REC (lit)
1-CLIP
1
¢
CLIP
START 1
¢
CLIP
END 1-CLIP
¢¢
h
¢¢
m
END
Displayed before and after operation during INTERVAL REC mode.
Displayed during INTERVAL REC operation.
Displays the pause time before the next recording during INTERVAL REC.
Displayed until images/audio are completely recorded to the P2 card after
stopping recording. Do not remove the P2 card or turn the power off until the
flashing display completely turns off.
Note
“P-REC” flashes regardless of the PRE RECORDING function settings.
This is lit if the MODE CHECK button is pressed when the PRE
RECORDING function is turned on. In addition, this displays when the
mode switches to PRE RECORDING mode by pressing the PRE REC
assigned USER switch.
Displayed when a recording is about to be recorded to a new clip while ONE
CLIP REC mode is on.
Displayed when a recording can be compiled and recorded to the previous
clip while ONE CLIP REC mode is ON.
Note
If the P2 card is removed or the clip is deleted, subsequent recordings are
recorded to a new clip when the previous combined clip does not exist. In
this case, “1
¢
CLIP” may remain displayed.
Displayed when recording of a new clip has started in ONE CLIP REC
mode.
Displayed when a combined clip is complete in ONE CLIP REC mode.
If a video encoder card (AJ-YAX800G, optional accessory) is attached, the
remaining free space on the SD Memory card will be displayed when the
MODE CHECK button is pressed during proxy recording.
[END] is displayed when there is no remaining free space.
30. FILM-REC
F
Displayed when FILM-REC is selected in GAMMA MODE SEL
Information Item
Indication
Status
[i]
[SD]
AJ-HPX3000G(VQT1K82-5)E.book 76 ページ 2009年11月12日 木曜日 午後8時19分