Panasonic HPX3000 Manual Download

Page: 85 / 116

163

Menu : Menu Description Tables

This variable range is the numerical values for 59.94 Hz. For
50 Hz, the frame rate is up to 24f. The frame rate is up to 23f
in 24PN (Native) mode.

◆

Note

Displayed REC TIME, PAUSE TIME and TOTAL REC TIME
are translated into either drop-frame or non-drop-frame
according to the mode of operation.
TAKE TOTAL TIME is actual time. Therefore, TOTAL REC
TIME may incorporate fractions, depending on the settings.

REC FUNCTION

Items/

Data Saved

Adjustable

Range

Remarks

INTERVAL
REC MODE

ON
ONE SHOT
OFF

Sets INTERVAL REC function.

ON:

Uses internal memory to perform
interval recording.

ONE SHOT:

Performs “one-shot” recording for the
duration specified under REC TIME,
and then stops.

OFF:

INTERVAL REC is not performed.

Note

This item cannot be changed when “ON”
is selected for the LOOP REC MODE
item or for the ONE CLIP REC MODE
item.

– C U F –

INTERVAL
REC HOLD

ON
OFF

Selects whether INTERVAL REC MODE
settings are retained or not when the
power is turned off once.

ON:

Retain

OFF:

Do not retain. The INTERVAL REC

MODE is OFF whenever the power
is turned on again.

– C U F –

REC TIME*

00s01f
:
59s29f

Set REC TIME (1 cut).

Note

However, the settings can be made
frame by frame, and the numbers of the
cut-off unit frames for the shortest time
period and the set time on the actual
operation may vary with the recording
method. For details, refer to [

Interval

Recording

] (page 37).

– C U F –

PAUSE TIME*

00h00m00s01f
:
00h04m59s29f
:
23h59m59s29f

Specify PAUSE time for recording.

Note

However the settings can be made frame

by frame, and the numbers of the cut-off
unit frames for the shortest time period
and the set time on the

actual operation

may vary with the recording method. For
details, refer to [

Interval Recording

]

(page 37).

– C U F –

TAKE TOTAL
TIME

NONE
:
5day

Specify the time needed for shooting.
Select from NONE (continue until
operation is manually stopped) to 5 days.

– C U F –

TOTAL REC

TIME*

00m00s01f
:
99m59s29f
OVER100min
NONE

Display total recorded time. The setting
cannot be changed using this option.
Displays the recording time (recording
time needed for the P2 card) calculated
using REC TIME, PAUSE TIME, and
TAKE TOTAL TIME.

Note

A value based on actual processing is
displayed

– – – – –

AUDIO REC

ON
OFF

Select whether or not sound will be
recorded.

– C U F –

START DELAY 0SEC

:
10SEC

Set the delay after pressing REC START
to start recording in INTERVAL REC.

– C U F –

PRE REC
MODE

ON
OFF

Select whether or not to enable PRE-
RECORDING.

ON:

PRE-RECORDING enabled.

OFF:

PRE-RECORDING disabled.

Note

Specify the PRE-RECORDING time by
using the menu option PRE REC TIME.

– C U F –

Items/

Data Saved

Adjustable

Range

Remarks

PRE REC
TIME

1SEC

8SEC

15SEC

Set PRE RECORDING.

1-15SEC:

Set the length of time that can be
retrospectively recorded before the
REC START button is pressed.

Note

When the SYSTEM MODE menu option
on the SYSTEM MODE screen is set to
1080-59.94i or 1080-50i, or when it is
set to 480-59.94i or 576-50i and the
REC MODE menu option is set to
DVCPRO50, the upper limit of the above
recording time is 8 seconds.

– C U F –

LOOP REC
MODE

ON
OFF

Select whether or not to enable LOOP
REC.
This setting can be used with PRE-
RECORDING features.

ON:

Enable LOOP REC.

OFF:

Disable LOOP REC.

Notes

After the power is turned off, this item
will default to OFF the next time the
power is turned on.

This item cannot be changed in the
following cases.

When “ON” or “ONE SHOT” is
selected for the INTERVAL REC
MODE item