PAGE 12
• Model No:
Identifies the model type (letters on left)
as well as the model size (numbers on right)
• Serial Number:
The unique number given to each
case.
• Asset Code:
Optional identification number for
supermarket stores.
• Project:
Used to identify location site for the case
• SO Number:
Sales Order number
• PO Number:
Purchasing Order Invoice number
• Department Type:
The type given for
merchandising location, eg bakery, dairy, deli etc.
• Model :
Identifies the model type (letters on left) as
well as the model size (numbers on right)
• Climate Class:
The climate class relates to the
atmospheric, or ambient conditions outside the
fridge or freezer. These conditions determine
how much energy the unit will utilise in specific
environments.
• Net Volume:
The net volume is the total space
inside the case.
• Refrigerant:
Identifies the refrigerant used in the
case.
• Voltage:
Voltage is the amount of potential energy
between two points on a circuit. This is measured
in volts (V).
• Fans Current:
The fans
flow of electricity which
results from the ordered directional movement of
electrically charged particles, measured in Amps
(A).
• Asset Code:
Optional identification number for
supermarket stores.
• Anti-Sweat Current:
The heater thats installed
in the frames and doors of refrigerated cases to
reduce condensation and prevention fogging, this
is measured in Amps (A).
• Defrost and Drain Current;
The current from
heaters that are installed in freezer cases to stop the
case from icing up, measured in Amps(A).
• Dimensions:
The sizing of the case measured in
milimeters(mm) L x W x H.
• Type:
The type given for merchandising location,
eg bakery, dairy, deli etc.
• Net Weight:
The net weight is the total weight
including shelving and all part supplied with the
case.
• Date of Manufacture:
The date of build.
• Frequency:
Frequency is the rate at which current
changes direction per second. It is measured in
Hertz (Hz), an international unit of measure where 1
Hertz is equal to 1 cycle per second.
• Lights Current:
The total current of the lighting
modules in a case, measured in Amps (A).
• Configuration ID:
Identifies the model type, model
size, the lineup number and the case sequence
number.
• Serial Number:
The unique number given to each
PACKAGING TAG:
RATING PLATE:
ASSET CODE:
RATING PLATE (Continued):
PRE INSTALLATION
SMED SEMI VERTICAL - HUSSMANN
