Preparation
17
Initial setting using the
cordless handset
Setting the dialing mode
If you cannot make calls, change this
setting depending on your telephone line
service. The default setting is “
音频
”.
“
音频
”: For tone dial service.
“
脉冲
”: For rotary pulse dial service.
1
Press
{
菜单
}
(
{
F1
}
key).
2
Press
{#}{
0
}{
7
}{
9
}
.
3
Press
{
<
}
or
{
>
}
repeatedly to select
the desired setting.
4
Press
{
保存
}
(
{
F1
}
key), then press
{
关闭
}
.
Setting the date and time
Set the date and time so that the unit will:
– display the date and time the calls were
received in the caller list (page 36).
– display the date and time while listening
to messages using a cordless handset
(page 46).
– announce the day and time each
message was recorded by the
answering system (page 43) when you
play back messages.
1
Press
{
菜单
}
(
{
F1
}
key).
2
Press
{#}{
0
}{
0
}{
1
}
.
3
1
Enter the current year.
L
You can set the year 2000 to 2099.
2
Enter the current month and day by
selecting 2 digits for each.
Example: July 15, 2006
Press
{
2
}{
0
}{
0
}{
6
}
{
0
}{
7
}
{
1
}{
5
}
.
4
Enter the current hour and minute
(24-hour clock format) by selecting 2
digits for each.
Example: 21:30
Press
{
2
}{
1
}
{
3
}{
0
}
.
5
Press
{
保存
}
(
{
F1
}
key).
L
If the cordless handset beeps 6
times, the date and time were not set
correctly. Enter the correct digits.
6
Press
{
关闭
}
.
Note:
L
If you make a mistake when entering the
date and time, press
{
<
}
or
{
>
}
to move
the cursor, then make the correction.
L
The date and time also display on the
base unit display.
L
The date and time may be incorrect after
a power failure. Set the date and time
again.
:2006.12.31
:00:00
:2006.07.15
:00:00
ENG_TG2871CN.book 17 ページ ２００６年５月１日 月曜日 午前１１時３３分
