Answering System Features
48
Remote operation
Using a touch tone phone, you can call
your phone number from outside and
access the unit to listen to messages.
Important:
L
In order to operate the answering
system remotely, you must first set a
remote code (page 49). This code must
be entered each time you operate the
answering system remotely.
Using the answering system
remotely
1
Dial your phone number from a touch
tone phone.
L
If the ring count is set to
“
留言查询话费节省
” (page 49), the
number of rings you hear will indicate
whether or not you have new
messages.
2
After the greeting message starts, enter
your remote code.
L
The unit will announce the number of
new messages, and will play back the
new messages.
L
When you have no new messages,
the unit will announce “
没有新留言
(
No new messages.
)”.
3
Enter the remote commands.
4
When finished, hang up.
Note:
L
When you press a key, press firmly.
L
You can hang up at any time.
Remote commands
You can press dial keys to access certain
answering system functions.
*1 If pushed within the first 5 seconds of a
message, the previous message will be
played.
*2 To resume operation, press a command
key within 10 seconds, or the call will be
disconnected.
Turning on the answering system
remotely
If the answering system is off, you can turn
it on remotely.
1
Dial your phone number.
2
Let the phone ring more than 15 times.
L
The unit will answer your call with the
greeting message.
L
You can hang up, or if you call from a
touch tone phone, you can enter your
remote code and begin remote
operation.
Key
Remote command
{
1
}
Repeat message (during
playback)
*1
{
2
}
Skip message (during
playback)
{
4
}
Play new messages
{
5
}
Play all messages
{
9
}
Stop
*2
{
0
}
Turn answering system off
{*}{
4
}
Erase this message (during
playback)
{*}{
5
}
Erase all messages
ENG_TG2871CN.book 48 ページ 2006年5月1日 月曜日 午前11時33分