VQT3P50
131
CONNEC
T
ING T
O
A COMPUT
E
R
USING AS A CARD READER
Mounting your camera
1
Set the camera to the card reader mode (page 129).
h
The message [Found New Hardware] appears in the task tray,
showing that the camera is recognized as a drive.
h
The card is recognized (mounted) as a disk, and the [CAM_SD (E:)]
icon appears in the [My Computer] window.
h
The drive name (E:) may be different on your computer.
2
Select an action.
h
If the [CAM_SD (E:)] window appears automatically, select the desired
procedure from the window.
3
Copy the files from your camera to the computer.
Dismounting the camera
HINT
i
To disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1
Left-click on the icon for safely removing hardware in the task tray.
h
A list appears showing the devices connected to the computer’s USB
terminal.
2
Left-click on the camera drive (E:).
3
Click on the [×] button.
h
The camera can now be disconnected.
h
The drive name (E:) may be different on your computer.
