VQT3P50
29
SETUP
2
Insert the battery pack, then replace the battery cover.
h
It is possible to insert the battery incorrectly, so please pay particular
attention when inserting that it is correctly oriented.
<To remove the battery pack...>
h
Be sure the turn off the camera by pressing the power button until the
status indicator (page 25) turns off before removing the battery pack.
Battery pack
Connector markings
4
Close
and slide
shut
3
Insert the battery pack while
matching the connector markings.
5
Push the battery cover lock to
the left to lock it.
The colored label is visible when
the battery cover lock is not
completely closed. Be sure to
close the lock completely so that
the colored label is not visible.
Colored label