- 190 -
You can view and change this unit’s device name (SSID), which is used
for operating this unit as a wireless access point.
1
Select [
INPUT] using the SET button and then press the SET
button.
2
Enter the desired device name (SSID).
≥
Input up to about 20 characters are recommended. All the characters
cannot be confirmed when displaying the Device names on this unit if a
long Device name is used. (
≥
For details on how to enter characters,
refer to page
3
Select [
ENTER] using the SET button and then press the SET
button.
≥
If you are going to connect directly to a smartphone after changing the
device name (SSID), set the connection again with the changed device
name (SSID) (
≥
The Password entered during the setting of direct connection cannot
be changed. (
You can change or check your wireless LAN’s network settings, such as the
[IP Address], [Subnet Mask] and [MAC Address].
≥
If you select [AUTO], the network settings are configured
automatically. If you select [MANUAL], you can set each item.
Select the item you want to set, and set it.
≥
[MAC Address] cannot be changed.
[Device Name]
[Wireless LAN setup]
[LAN setup]/[IP Address]/[Subnet Mask]/[Gateway]/[MAC Address]