- 63 -
Select the menu.
Please refer to page
Opening the LCD monitor will switch from Standby Mode to Recording
Standby Status in approximately 0.5 seconds (in Recording Mode only).
≥
When in Quick Start Standby Mode about 50% of the power used
in recording standby mode is being consumed, so the recording
time will be reduced.
≥
Set to Recording Mode. (
)
1
Select [QUICK START] with the SET button and press the SET
button.
2
Select [ON] with the SET button and
press the SET button.
3
Close the LCD monitor.
The status indicator
A
flashes green and the
unit goes into Quick Start standby mode.
≥
Pressing the power button
B
for a short time will also set the status to
Quick Start Standby Mode.
Using the Option Menu
[MENU]: ,
or
#
desired setting
OPTION MENU 1
[CLOCK SET]
[QUICK START]
1
2
3
1
