14
Selecting Power
& Cook Time
NOTES:
1. For more than one stage cooking, repeat
steps 1 and 2 for each stage of cooking
before pressing
Start
Pad. The maxi-
mum number of stages for cooking is 5.
When operating, two beeps will sound
between each stage. Five beeps will
sound at the end of the entire sequence.
2. When selecting P10 (HIGH) power, the
maximum programmable time is 30 min-
utes. For other power levels, the maxi-
mum time is 99 minutes and 30 sec-
onds.
3. For reheating, use P10 (HIGH) for liq-
uids, P7 (MEDIUM-HIGH) for most foods
and P6 (MEDIUM) for dense foods.
4. For defrosting, use P3 (MEDIUM-LOW).
DO NOT OVERCOOK.
This oven requires
less time to cook than an older unit.
Overcooking will cause food to dry out and
may cause a fire. A microwave oven’s
cooking power tells you the amount of
microwave power available for cooking.
Example: To cook at P 6 (MEDIUM)
power for 1 minute 30 seconds
Press
once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
Power Level
P10 (HIGH)
P9
P8
P7 (MEDIUM-HIGH)
P6 (MEDIUM)
P5
P4
P3 (MEDIUM-LOW)/DEFROST
P2
P1 (LOW)
Quick Min Feature
NOTES:
1. If desired, you can use other power
levels. Select desired power level
before setting cooking time.
2. After setting the time by
Quick Min
Pad, you cannot use Number Pads.
3.
Quick Min
Pad can be used to add
more time during manual cooking.
1.
• Press
Quick Min
until
the desired cooking
time (up to 10 min-
utes) appears in the
display window.
Power Level is pre-set
at P10.
2.
Press
Start
.
Cooking begins and the
time will count down.
At the end of cooking,
5 beeps sound.
Keep Warm Feature
This feature will keep food warm for up to
30 minutes after cooking.
Example: To keep 2 cups of gravy warm
1.
• Press
Keep Warm
.
2.
• Set warming time, up
to 30 minutes.
3.
• Press
Start
.
➤
Keep Warm will
start. The time in
the display window
will count down.
NOTE:
Keep Warm
can be programmed as the
final stage after cook time/s have been
manually entered. It cannot be used in
combination with sensor or auto features.
This feature allows you to set or add
cooking time in 1 minute increments up to
10 minutes.
To Set Cooking Time:
1.
• Press
Power Level
until the desired
power level appears
in the display window.
2.
• Set Cooking Time,
using Time Dial to 1
minute and 30 sec-
onds.
3.
• Press
Start
.
➤
Cooking will start.
The time in the
display window will
count down.
Press 5 times
Time Dial
Push & rotate
Time Dial
Push & rotate
F00037D00CP 2005.03.03 14:54 Page 16