Temperature control (Fine adjustment mode)
This refrigerator is specially designed for appropriate use, which can adjust the temperature level to
detailed 9 levels with the following details.
How to operate the “9 levels” mode
1. Set LED display to “Min” with the “Freezer” button.
2. Press and hold the “Freezer” button (for a few seconds) until the LED display return to show
at “Min” position.
3. Set “9 levels” mode following below table mentioned by pressing the “Freezer” button.
LED Display table (Model: NR-BX41BX, NR-BX46BX)
8
For the freezer room
Not lighting
Blinking
Lighting
Cooling Level
Minimum
Maximum
Step
1
2
3
4
5
6
7
8
9
LED DISPLAY
Cooling Level
Minimum
Maximum
Step
1
2
3
4
5
6
7
8
9
LED DISPLAY
LED Display table (Model: NR-BX41BV, NR-BX46BV)
To reset the setting “9 levels” mode
Repeat step 1 and 2, then the refrigerator return to normal operation mode.
Remark:
Temperature control varies depends on the changing of environment and food storage quantity.
For the Fridge Room
Operate above 1 ~ 3 steps with pressing “Fridge” button instead of “Freezer” button.
Not lighting
Blinking
Lighting
Quick freezing
How to operate the “Quick Freezing” mode
starts after 10 seconds.
The system will stop operating automatically when it runs for 120 mins (as ambient
temperature is below 25C) or 150 mins (as ambient temperature is above 25C) and
return to normal mode (Blue light LED turns off.)
Remarks :
Blue light LED
flashing means that the defrosting system is now working
“Quick Freezing” mode will start right after the defrosting operation is
finished.
Freezer temp. control does not operate during “Quick Freezing” mode.
If you want to stop the operation immediately, press the button “Freezer” until
Blue light LED turns off.
Press the button “Freezer” until Blue light LED turns on. “Quick Freezing” mode
