13
English
∫
AV devices
(DVD Recorder / Blu-ray Recorder, Set top box, etc)
≥
For details, refer to [eHELP] (Search by Purpose >
Watching > Basic > Basic connection).
∫
Aerial
Special notices for receiving digital terrestrial
services
≥
If you receive analogue and digital TV signals through
two separate aerials, use an RF mixer to mix them.
TV
RF cable
RF mixer
Aerial (Analogue TV)
Aerial (Digital TV)
≥
If you receive analogue TV signals through a cable TV
network, an aerial is required to receive digital TV
signals.
In this case, using an RF mixer is not recommended
because the TV signals interfere with each other.
≥
An RF selector is available to switch analogue and
digital TV signal.
TV
RF cable
RF selector
Aerial (Digital TV)
TV
RF cable
Aerial
≥
For Digital TV, Analogue TV
≥
Keep the space between the TV and RF cable to
prevent distorted image.
≥
Do not put the RF cable close to the mains lead to
avoid noise.
≥
Do not place the RF cable under the TV.
≥
An aerial, correct cable (75
Ω
coaxial) and correct
terminating plug are required to obtain optimum
quality picture and sound.
≥
If a communal aerial system is used, you may require
the correct connection cable and plug between the
wall aerial socket and the TV.
≥
Your local Television Service Centre or dealer may be
able to assist you in obtaining the correct aerial
system for your particular area and the accessories
required.
≥
Any matters regarding aerial installation, upgrading of
existing systems or accessories required, and the
costs incurred, are the responsibility of you, the
customer.
≥
To obtain optimum quality picture, select either an
Aerial or a cable TV network.
Basic connections
Cable
(Analogue TV)
TH-65JZ2000GKT_Eng_TQB4GA0043.book 13 ページ ２０２１年６月８日 火曜日 午後５時５３分
