background image

63

 

 

 
13.

 On the H

2

O

2

 Decontamination Step2 screen, 

press OK key to lead the H

2

O

2

 Decontamination 

Step3 screen and H

2

O

2

 decontamination is started. 

H

2

O

2

 decontamination is performed automatically 

from Step3 to Step8 (procedure 

14

).

 

Note:  

The outer door is locked with electric lock for 

safety until completion of H

2

O

2

 decontamination.

 

Buzzer sounds when H

2

O

2

 decontamination is 

completed (About 100 minutes later). 
 

 

CAUTION

 

The electric lock will remain locked if power supply is cut off during H

2

O

2

 decontamination. After the power 

supply is recovers, the H

2

O

2

 gas resolution process will start execution and finish automatically. Execute 

the decontamination again because the decontamination is not completed. 
 

WARNING

 

Do not use the unlock key to unlock the outer door during H

2

O

2

 decontamination or during H

2

O

2

 

gas resolve by UV. 

Doing so may cause harm to health from H

2

O

2

 gas leakage. 

 

Step3 is the process to warm the chamber 

temperature to 45 

o

C. 

Note:

 By pressing Abort key, H

2

O

2

 decontamination 

is stopped in the middle of decontamination and go 
to Step8 (The End of H

2

O

2

 decontamination). 

 
 
 
 
 
 
 
 

Step4 is the process to decontaminate in the 

chamber by generating H

2

O

2

 vapor from H

2

O

2

 

generator. 

Note:

 By pressing Abort key, H

2

O

2

 decontamination 

is stopped in the middle of decontamination and go 
to Step7 (The process to resolve H

2

O

2

 vapor by UV 

lamp). It is not possible to skip Step7. 
 
 
 
 
 
 

Summary of Contents for KM-CC17R2 Series






























































































Reviews: