8.1.3 Scanning by selecting the preset condition
Register the scan settings as a preset in advance. For details, refer to "8.1.1.9 Registering a preset" (page
63).
Operate the unit as follows.
1.
Touch the Favorite button (
).
2.
Touch the icon (
).
3.
Touch the preset to select.
4.
Place the documents on the feed tray (page 49).
5.
Press the Start/Stop button (
) to start scanning.
•
If "Confirm Output Path" in the "Preset Scan" settings is enabled, the output path will be displayed on
the LCD. Confirm the output path, and then press the Start/Stop button (
) again.
•
If "Confirm Output Path" in the "Preset Scan" settings is disabled, scanning will start.
•
Remove documents after they have been scanned.
8.1.3 Scanning by selecting the preset condition
73
