6
Network PC Mode
Preparation
Configure the network settings
You should configure the network settings using the LCD on the unit, Network Setting Tool, and Configuration Web.
Add the scanner to the computer that will receive scanned data
1.
Start Network Scanner Select Tool on the computer that will receive scanned data.
2.
Add the scanner to the list.
3.
Select the check box of the scanner that you are using.
4.
Click [OK].
•
The scanner can select the computer as the destination.
Register Jobs in Image Capture Plus on the computer that will receive scanned data
1.
Start Image Capture Plus.
•
Select [Image Capture Plus Standard] as the application mode.
2.
On the [Scan Setting] menu, enable [Job Scan Mode].
Note
•
You cannot enable [Job Scan Mode] if any documents are left in [Document List].
3.
On the [Scan Setting] menu, click [Job Setting List…].
4.
Click the [Add…] button.
•
The [Job Setting] dialog box is displayed.
5.
Specify the settings.
Note
•
When using Network PC Mode, Touch Free Scanning is not available.
•
The top 10 jobs in the job settings list are available for Network PC Mode.
