Item
Contents
LCD Contrast
Set the LCD contrast (5 levels).
Roller Cleaning
Notification
Enable (On) or disable (Off) the roller cleaning notification.
Roller Replacement
Notification
Enable (On) or disable (Off) the roller replacement notification.
Glass Cleaning
Notification
Enable (On) or disable (Off) the scanner's internal cleaning notification
function.
Select Counter
Select the counter from [Scan] or [System] that appears on the Home screen
and the screen displayed during scanning.
Home Screen
Select whether to display [USB Job] or [Preset] on the Home screen.
Counter
Select the counter using or of the cursor button, and press the OK button to complete your selection.
The types of selectable counters are shown below.
Setting contents
Item
Contents
Scan Counter
The number of documents scanned during the scanning process. The scanned
quantity is cleared each time you start scanning.
System Counter
The number of documents scanned by the scanner since it was shipped from
the factory.
After Clean Roller
Counter
The number of documents scanned since clearing the counter after cleaning
the rollers. Clear after cleaning the rollers.
After Replace Roller
Counter
The number of documents scanned since clearing the counter after replacing
the rollers. Clear after replacing the rollers.
Clear Clean Roller
Counter
Set the After Clean Roller Counter to zero (0).
Clear Replace Roller
Counter
Set the After Replace Roller Counter to zero (0).
Clean Roller Timing
Displays the number of documents that can be scanned until the roller
cleaning notification appears.
Replace Roller Timing
Displays the number of documents that can be scanned until the roller
replacement notification appears.
Network Setting
Setting contents
Item
Contents
Network Status
Display the network status.
DHCP
Enable (On) or disable (Off) DHCP.
5.3 Menu screen
29