11.7 Factory Reset
This function will erase all of the settings in the scanner and initialize it to the factory default settings.
•
This unit saves the information that you set, such as the network configuration, passwords, e-mail
addresses, etc. To prevent leakage of your information, initialize the unit to the factory default settings
before you discard or transfer the unit.
•
You cannot restore the settings after Factory Reset. Keep a copy of all important data.
•
If you forget the user name or password, you can reset the user name and password using Factory
Reset. After Factory Reset, configure the scanner again.
•
The following items are reset by "Factory Reset".
–
–
–
–
–
Server (page 76)
–
Information Notification (page 78)
–
User Name / Password (page 79)
*1
"System Counter" is not reset.
1.
Connect the unit to your computer via USB.
2.
Start User Utility.
3.
Click [Maintenance Setting].
4.
Click [Factory Reset] and follow the on-screen instructions.
Note
•
Resetting the current language during a factory reset is optional. If you choose to reset the
language settings, the LCD display will prompt you to select a new language setting after the
scanner restarts.
11.7 Factory Reset
110