6.2.1.4 Carrier sheet (KV-SS077)
You can use an optional carrier sheet (KV-SS077) to scan passport. When using the carrier sheet, please
note the following conditions for the documents. For details about compatible passport, refer to
"6.2.1.3 Compatible Passport" (page 35).
How to insert the passport into the carrier sheet
Insert the passport so that the thinner part (photo page) is at the bottom of the carrier sheet, as shown in the
illustration.
Make sure the documents do not protrude from the carrier sheet.
Note
•
When using a carrier sheet, please refer to "6.2.2.1 When using the carrier sheet" (page 44).
•
Depending on the condition (operating environment, dirt, scratches, etc.) of the carrier sheet or
passport, the image processing function may not work properly. Scan beforehand to confirm the
scanned image.
•
If the rollers are dirty, the scanned image will be stretched or distorted. In such cases, clean the
rollers.
•
If vertical streaks appear on the scanned image, clean the scanning glasses and the carrier sheet.
Vertical streaks may be caused by scratches on the carrier sheet. If vertical streaks appear after
cleaning the scanning glasses and the carrier sheet, replace the carrier sheet, and then scan the
passport.
6.2.1 About documents for the ADF
36
