4.
Insert the carrier sheet (
A
) until it stops as shown in the illustration.
1
Note
•
When manual scanning (Manual) is selected, make sure to insert the documents until they come
into contact with the paper feed roller.
5.
Start scanning.
Note
•
If the rollers are dirty, the scanned image will be stretched or distorted. In such cases, clean the
rollers.
•
If vertical streaks appear on the scanned image, clean the scanning glasses and the carrier sheet.
Vertical streaks that appear may be caused by scratches on the carrier sheet. If vertical streaks
appear after cleaning the scanning glasses and the carrier sheet, flip over the carrier sheet to the
other side, or replace the carrier sheet, and then scan the documents.
28
Operating Manual
Operation
