Panasonic KV-S1027C Service Manual Download

Page: 184 / 255

Abbreviations

•

Windows

refers to the Microsoft

Windows

operating system (hereafter Windows).

•

Windows

XP refers to the Microsoft

Windows

XP operating system (hereafter Windows XP).

•

Windows Vista

refers to the Microsoft

Windows Vista

operating system (hereafter Windows Vista).

•

The explanations and screen shots in this manual are based on the Windows 7 operating system.

•

The screen shots used in this manual may differ from the screens displayed on your computer.

•

The illustrations in this manual are based on the KV-S1057C.

Trademarks

•

Microsoft, Windows, Windows Vista, and Internet Explorer are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.

•

ISIS is a registered trademark or trademark of EMC Corporation in the United States and/or other countries.

•

IBM is a trademark of International Business Machines Corporation, registered in many jurisdictions
worldwide.

•

Intel and Intel Core are trademarks of Intel Corporation in the U.S. and/or other countries.

•

Adobe and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated
in the United States and/or other countries.

•

All other trademarks identified herein are the property of their respective owners.

Operating Manual

Introduction

Summary of Contents for KV-S1027C
































































































































































































































































Search results

Summary of Contents for KV-S1027C

Reviews:

Related manuals for KV-S1027C

Brands by name

Popular brands

Panasonic KV-S1027C, Service Manual

Search results

Summary of Contents for KV-S1027C

Reviews:

Related manuals for KV-S1027C

Brands by name

Popular brands