6.2.2 Loading documents
1.
Set the feed tray (page 19) and exit tray (page 20).
2.
Adjust the document guides ( ) slightly larger than the actual size of the documents.
1
3.
Fan the documents.
•
Documents that have been stapled together or stacked together (as in a file folder) will need to be
separated.
Fan the stack of documents to separate all the edges.
Hold both ends and bend the documents as shown in the illustration.
To flatten the documents, hold firmly and pull them apart as shown in the illustration.
1
2
3
Repeat these steps as necessary.
4.
Carefully align the documents.
•
The documents feed better when the leading edges are aligned slantwise as shown in the illustration.
1
2
6.2.2 Loading documents
27
