*3
To assure continued emission limit compliance, use only shielded LAN cable. The cable should be a CAT 5 (Category 5) or higher
for 10Base-T / 100Base-TX, or CAT 5e (Enhanced Category 5) or higher for 1000Base-T.
*4
The actual line speed may be different depending on the network environment and the wireless devices connected.
*5
Depending on the wireless router (wireless access point) used, connections may not be possible between the unit and the wireless
router. When connecting with 802.11n, select WPA-PSK (AES) or WPA2-PSK (AES) for security. Use WPA2 (AES) for security. If
WPA (AES), WPA (TKIP) or WPA2 (TKIP) must be used, please set the access point key renewal interval for 2 minutes. A difficult
to predict passkey (PSK) of 20 or more characters is recommended.
10.15 Specifications
113
