5 Operation Panel
1
4
5
6
7
3
2
LED
(Red)
Lights when an error occurs.
LED
(Green)
Shows the wireless LAN status.
LED
(Green)
Shows the scanner’s status.
Power button ( )
For details, see "6.1.1 Turning ON/OFF the unit's power" (page 28).
Skip button (
)
If you press this button after a double feed is detected and scanning has been paused, the document (or
documents) detected as a double feed will be scanned. Scanning will continue after the document is
scanned.
Single touch scan button 1 to 3
You can register a job to each button. For details about registering jobs, see "6.4 Using Push Scan"
(page 49).
Start/Stop button (
)
•
If you set [Wait Key] for "Manual Feed Mode" in your application software, pushing this button starts
scanning. For details about "Manual Feed Mode", refer to the Image Capture Plus, TWAIN, or ISIS
help.
•
During scanning, pushing this button stops scanning.
•
If you press this button after a double feed is detected and scanning has been paused in pull scan,
scanning will stop without being scanned.
5 Operation Panel
26