6.4.2 Output File
The output image file name is as follows.
Prefix
Item
delimiter
Type Code
Item
delimiter
Sequence
Dot
Extension
1 to 15
characters
1 character
1 character
1 character
5 characters
1 character
3 characters
Example
Panasonic_
DOC01
-
M
-
00001
.
jpg
*1
If a Factory Reset is performed on the unit, the Sequence ID applied to file names pushed to all destinations will also be reset.
Therefore, you should assign a different folder path from the existing one to prevent existing data from unexpectedly being
overwritten.
*2
Up to 31 characters if [Location] is selected. Up to 78 characters if [Combination] is selected.
Prefix
Type of prefix
Number of characters
Contents
Host Name
3 to 15
Set the value of "Network
Setting" in "IP Configuration"
(page 69).
Date and Time
14
The format set in [Date & Time]
(page 67).
•
YYYYMMDDhhmmss
•
MMDDYYYYhhmmss
•
DDMMYYYYhhmmss
User-defined Field
1 to 15
Set the value of "File Name" in
"Scan Settings" (page 60).
Location
1 to 31
Set the value of "Network
Setting" in "IP Configuration"
(page 69).
Combination
1 to 78
The following contents can be
combined. Set the value of "File
Name" in "Scan Settings" (page
60).
•
Host Name
•
Date and Time
•
User-defined Field
•
Location
6.4.2 Output File
51
