5.
Set the exit tray.
The exit tray prevents documents from dropping
after they are scanned. Follow the steps below to
set the exit tray.
a.
Raise the exit stopper (
A
).
A
b.
Pull out the exit tray (
A
) and the exit extension
tray (
B
).
2
1
6.
Connect cables.
•
Connect the power cord to the AC adaptor.
•
Connect the AC adaptor to the scanner.
•
Plug into the AC outlet.
•
Connect the USB cable to the scanner and to
your computer.
Note
•
Use only with the power cord and the AC
adaptor enclosed with the unit.
•
Use the USB cable enclosed with the unit.
•
When the unit is not used over an extended
period of time, switch it off, and unplug it.
The power consumption is approximately
0.3 W when the unit is turned off, and the
AC adaptor is connected to the AC outlet.
C
D
E
F
A
B
AC adaptor
Power cord
To AC outlet
To computer
USB cable
Power switch
Installation Manual
13
Installation