Examples of displays of scanner statuses are as follows.
G: nn
GROUP NAME
Group number (two-digit) and Group name of job.
Push Scan Mode: USB mode
J: nn
JOB NAME
Job number (two-digit) and Job name.
Push Scan Mode: USB Mode / Network PC mode
PC: nn
PC NAME
PC number (two-digit) and PC name.
Push Scan Mode: Network PC mode
: n
PRESET GROUP NAME
Preset group number (one-digit) and preset group name.
Push Scan Mode: Preset Scan mode
PS: nn
PRESET NAME
Preset number (two-digit) and preset name.
Push Scan Mode: Preset Scan mode
Unn
MESSAGE
Error code and Error message.
•
For details, refer to "10.4 Error Code and Error Messages" (page 81).
5.3 Menu screen
The Menu screen is displayed when you press and hold the Skip/Menu button (
) for 1 second or more.
Select [Function Setting], [Counter], [Network Setting] or [Maintenance] using or of the cursor button.
Press the OK button to complete your selection.
If you press the Skip/Menu button (
) when the Menu screen is displayed, you will return to the previous
screen.
If you press the Start/Stop button (
) when the Menu screen is displayed, you will return to the home
screen.
Note
•
Some settings can also be configured using Configuration Web. For details, refer to "7 Configuration
Web" (page 53).
Function Setting
Configures each function's setting. Use or of the cursor button to select items, and , , or to
change their value. Press the OK button to complete your selection.
Setting contents
Item
Contents
Version
Display the scanner's firmware version.
USB ID
Display the scanner's USB serial number.
Date & Time
Set the date and time.
Language
Set the language used on the LCD.
Sleep (min.)
Set the length of time before entering sleep mode (1 to 240 min.).
Auto Off
Enables(On) or disable (Off) the power auto-off function.
Auto Off (hour)
Set the length of time before the auto-off function activates (15 min. to 72
hrs.).
Auto Off (min.)
5.3 Menu screen
23