6.4.2 Network PC mode
Scanned data is pushed to a computer connected over the LAN.
•
Both the scanner and Image Capture Plus process the image.
•
A job should be registered in Image Capture Plus in advance. For details about registration, refer to the
Image Capture Plus help.
•
You can select a job from the top 10 jobs in the job settings list.
1.
Press the Skip/Menu button (
) to select network PC mode.
2.
Use or of the cursor button to select a computer.
Note
•
By pressing the OK button, you can check the IP address of the currently selected computer. You
can use and of the cursor button to scroll. By pressing the OK button again, you can return to
the original screen.
3.
Use or of the cursor button to select a job.
4.
Place the documents on the feed tray.
5.
Press the Start/Stop button (
) to start scanning.
6.4.2 Network PC mode
51