8.3.16.
Conveyor Motor
(1)
Remove the Feed Tray. (See 8.2.8.)
(2)
Remove the Inner Cover (Upper). (See 8.2.7.)
(3)
Remove the Drive Belt. (See 8.3.6.)
(4)
Remove the Power Box Cover. (See 8.3.1. - (1), (2))
(Only for KV-S2045C/SU245C Series)
(5)
Disconnect the CN806 on the POWER Board.
(Only for KV-S2045C/SU245C Series)
(6)
Disconnect the connector on the Conveyor Motor.
(Only for KV-S2025C/SU225C Series)
(7)
Remove the 2 screws, holding the motor.
Reassembling Note
When installing the Conveyor Motor, attach the
Conveyor Motor wiring in clamps as shown in a
figure below.
8.3.17.
Door Switch
(1)
Remove the Side Cover (R). (See 8.2.1.)
(2)
Disconnect the cable.
(3)
Remove the 2 screws, supporting the Door Switch.
52
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
Summary of Contents for KV-S2045C
