9.2.
Function item list of Service Utility
Item
Purpose
Remarks
Scanner Status *2
To indicate scanner status. (Ready or Error or Warning)
2
Scanner Information *2
To indicate scanner information about Product ID, firmware version, board
revision, SCSI condition (ID No., Terminator), and so on.
2
Scanner Counter
Update All Counter *2 To update counter values of System Counter, Cleaning roller Counter, and
Replacing roller Counter.
1
Clear Counter for
cleaning roller *2
To clear Counter for cleaning roller to zero after cleaning roller.
1
Clear Counter for
replacing roller *2
To clear Counter for replacing roller to zero after replacing roller.
1
Scanner Condition
Sleep Mode *2
To set waiting time before entering to the sleep mode.
1
Clean Imprinter *1, *2
To clean an ink jet head of imprinter.
6
Warning Setting
To set warning timing to clean roller and to replace roller.
3
Set Default
To set “sleep mode setting” and “warning timing to clean and to replace roller”
to the default.
3
Test
LED
To light LED on the front panel with colors changing periodically
(Green — Orange — Red — Green —....)
5
Key / Sensor
To do Key or Sensor ON / OFF test.
5
Sensor Sensitive Level To check sensitive level of each Sensor. (Waiting, Starting Position, Ending)
5
Feed Motor
To check Paper Feed Motor’s rotating.
5
Conveyor Motor
To check Conveyor Motor’s rotating.
5
Feed
To check paper feed condition.
5
Sleep Mode
To check whether sleep mode function works properly.
5
CIS LED Level
To check peak output level after setting CIS LED lighting level each side.
5
CIS Black Level
To check black level after setting black off-set level each side.
5
Memory
To execute memory R/W test.
5
Adjust
Shading
To execute shading correction.
4
All Position
To adjust scanning length, vertical, and horizontal positions for front and back
sides automatically.
4
Individual Position
1. To execute automatic length, vertical or horizontal position adjustment for
front and back sides, individually.
2. To adjust scanning length, vertical, or horizontal position for front and
back sides manually.
4
Other
Save Information *2
To save scanner and PC information.
1
Note
*1: This item is available only when the optional Imprinter is installed. (KV-S2045C/SU245C Series only)
*2: These items are included in User Utility software.
Remarks
1.
Parameter setting by user
2.
Status indication
3.
Parameter setting by service person
4.
Adjustment
5.
Diagnosis
6.
Maintenance
61
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
Summary of Contents for KV-S2045C
