9.4.
Scanner Self-test
Without connecting scanner to PC, the following contents can be done as the scanner self-test. The following test is mainly
available for mechanical test after replacing or reassembling rollers (Drive roller, Sensor roller) and other mechanical parts related
to feed documents.
Test Item
Operation
LED status
Remarks
Paper Feed
Motor’s rotating
1 While pushing “
STOP/START Button
” on the front panel, turn
on the scanner.
2 Release the button at the timing when the LED color is
orange.
Changing periodically.
(Orange
Red
Green
OFF
Orange
Red
..........)
3 Confirm the LED on the front panel is orange. (This status
means entering into the paper feed motor’s rotating test
menu.)
ON (Color: Orange)
4 Push the “
STOP/START Button
“ to start rotating the Paper
Feed Motor.
ON (Color: Orange)
5 Push the “
STOP/START Button
“ to stop rotating.
ON (Color: Orange)
6 Turn off the scanner to finish this test.
OFF
Conveyor Motor’s
rotating
1 While pushing “
STOP/START Button
“ on the front panel, turn
on the scanner.
2 Release the button at the timing when the LED color is red.
Changing periodically.
(Orange
Red
Green
OFF
Orange
Red
..........)
3 Confirm the LED on the front panel is red. (This status means
entering into the conveyor motor’s rotating test menu.)
ON (Color: Red)
4 Push the “
STOP/START Button
“ to start rotating the
Conveyor Motor.
ON (Color: Red)
5 Push the “
STOP/START Button
“ to stop rotating it.
ON (Color: Red)
6 Turn off the scanner to finish this test.
OFF
Feed
1 While pushing “
STOP/START Button
“ on the front panel, turn
on the scanner.
2 Release the button at the timing when the LED color is green. Changing periodically.
(Orange
Red
Green
OFF
Orange
Red
..........)
3 Confirm the LED on the front panel is green. (This status
means entering into the feed test menu.)
ON (Color: Green)
4 Set documents on the feed tray.
ON (Color: Green)
5 Push the “
STOP/START Button
“ to start to feed documents.
ON (Color: Green)
6 Turn off the scanner to finish this test.
OFF
Shading
1 While pushing “
STOP/START Button
“ on the front panel, turn
on the scanner.
Do not turn off the
scanner, and not
open the door
during shading.
2 Release the button at the timing when the LED is OFF.
Changing periodically.
(Orange
Red
Green
OFF
Orange
Red
..........)
3 Confirm the LED on the front panel is OFF. (This status
means entering into the shading test menu.)
OFF
4 Set a shading paper (Part No.: PBQX90113Z-J) on the feed
tray.
OFF
5 Push the “
STOP/START Button
“ for 5 seconds to start
shading.
Blinking with color orange
(during shading)
6 After confirming the LED is OFF, turn off the scanner to finish
this test.
OFF
68
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
Summary of Contents for KV-S2045C
