e. According to the command from PC, the memorized data in the SDRAM is transmitted to the PC through SCSI Controller
(IC1030) and SCSI Connector (CN1004 or CN1005).
Note
In case of KV-S2045C Series, to secure the scanning speed (40ppm), The Gate Arrays (IC1501, IC1502) are built in
the CONTROL Board for front and back sides independently.
2. In Case of KV-S2025C Series
a. Based on white standard data memorized in Shading Memory (IC1505, IC1506) in advance, Gate Array (IC1501) processes
the data from the A/D Conv. to do shading correction for each side in common.
b. Next to the shading correction, the Gate Array also processes Gamma and dpi transformations to write the dpi data in
SDRAM (IC1510).
c. The Gate Array processes MTF correction with dpi data read from the SDRAM. And after that, the Gate Array writes the
MTF data in the SDRAM, again.
d. According to the command from PC, the memorized data in the SDRAM is transmitted to the PC through SCSI Controller
(IC1030) and SCSI Connector (CN1004 or CN1005).
81
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
Summary of Contents for KV-S2045C
