28
Display Panel Instructions
06 Checking the roller cleaning warning
0%:
This is displayed when “Clean Roller Warning
≤≤
%”
displayed is cleared.
100%:
This is displayed when the roller needs to be cleaned.
06 Clearing the roller cleaning warning
When pressing the
1
key and the
2
key simultaneously,
“Clean Roller Warning” will be cleared. Then “Completed” will be
displayed.
07 Checking the roller modules
replacement warning
0% :
This is displayed when “Replace Roll. Warning
≤≤
%”
displayed is cleared.
100% :
This is displayed when the roller modules need to be
replaced.
07 Clearing the roller modules
replacement warning
When pressing the
1
key and the
2
key simultaneously,
“Replace Roll. Warning” will be cleared. Then “Completed” will
be displayed.
08 Setting the product ID
The applications for the scanner which have been set can be
used.
•
An error results if an attempt is made to use a function which
are not provided with the KV-S2065 series of scanners.
•
No guarantees are given for complete compatibility.
09 Setting the sleep mode
To conserve energy and operating cost,
this scanner is provided with a
programmable power save feature. The
scanner is factory set with the power save
feature (sleep mode) turned on to comply
with E
NERGY
S
TAR
® requirement. If sleep
mode is enabled, the scanner enters the
sleep mode when the scanner is idle for 15
minutes.
•
1min.
T
60min.
•
To return from the sleep mode, press any key on the scanner
or issue the scan instruction from the application.
0 6 . C l e a n
W a r n i n g
R o l
l e r
0 %
0 6 . C l e a n
W a r n i n g
R o l
l e r
0 7 . R e p l a
W a r n i n g
0 %
c e
R o l
l
.
0 7 . R e p l a
W a r n i n g
c e
R o l
l
.
0 8 . P r o d u
K V - S 2 0 6 5
c t
I D
KV-S2065
KV-SS855
KV-S2055
KV-S6045
KV-S6055
0 9 . S l e e p
A f
t e r
1 5 m i n .
M o d e
Disable
After 1 min.
T
After 60 min.
