Display Panel Instructions
20
• Thick, creased, or edited documents with correction fluid as well as documents with holes near the center may
give you false double feed warning.
14 Double feed detection
If set to “Detect”, the scanner will detect double feeding.
• When scanning very important documents, confirm if the
number of scanned pages displayed on the LCD matches
the number of actual pages.
15 Setting the “Double Feed” detector
action
Host:
The scanner will act in response to commands from
the host computer.
Stop:
The scanner will display double feeding error and
stop when it detects double feeding.
Buzzer: When the scanner detects double feeding, it will
sound a buzzer, the power indicator will light red and
it will continue scanning.
After completing scanning, the scanner will display
double feeding warning.
Even if this buzzer is set to “OFF” in “Setting the
buzzer” (see
), it will still ring.
16 Setting the double feed detector
sensitivity
Low Sensitivity: The double feed detector’s sensitivity will be
low. Set this when there is an error for no
double feeding.
High Sensitivity: The double feed detector’s sensitivity will be
high. Set this when there is no error for dou-
ble feeding.
1 4 . D o u b l e
F e e d
H o s t
Not detect
Host
Detect
1 5 . D o u b l e
F e e d
A c t i o n
H o s t
Stop
Host
Buzzer
1 6 . D o u b l e
F e e d
S e n s .
H o s t
Low Sensitivity
Host
High sensitivity
Normal Sensitivity
Summary of Contents for KV-S3105C
Page 6: ...Notice 6 Caution Labels...
