Replacing Consumables
44
4
Remove the paper feed roller module
by removing its bearing from the guide
grooves of the chassis in the scanner.
5
Open the optional “Roller Exchange
Kit” (KV-SS026) or “Roller Exchange
Kit for thin paper” (KV-SS027), and
take out the new paper feed roller mod-
ule.
6
Install the new paper feed roller mod-
ule with its gear on the right.
≥
Insert the paper feed roller cover into the
paper feed roller hole before attaching the
bearings into the grooves of the chassis.
(
1
)
≥
Attach the bearings at both ends of the
paper feed roller module into the guide
grooves of the chassis in the scanner.
(
2
)
Paper feed roller module
1
2
2
Paper feed roller cover
Paper feed roller hole
Bearings
Chassis
Green levers
Summary of Contents for KV-S3105C
Page 6: ...Notice 6 Caution Labels...