Display Panel Instructions
23
Imprinter setting menu (by pressing the IMPRINT key)
If a post-imprinter is installed, you can set the following conditions.
Number, item and default display
• Pressing the
3
key will change to the next
mode.
• Pressing the
4
key will change to the
previous mode.
Contents
• Pressing the
1
key or the
2
key will change to another
value.
11 Setting the post-imprinter data
• This setting can be done only when a post-
imprinter is installed.
Host:
Printing will be done according to the host computer.
Count: Printing will be done according to the counter in the
“Select counter displayed on the LCD”.
12 Setting the post-imprinter position
• This setting can be done only when a post-
imprinter is installed.
By pressing the
1
key or the
2
key, you can specify the line
where printing starts from the top of the document. If “0”
character is set, printing starts from 10.0 mm.
The millimeter value displayed is an approximation.
The length per character varies, depending on the 04
orientation setting.
90° or 270°: 2.38 mm per character
0° or 180°: 3.44 mm per character
Character: 0 - 72
• In this example, printing starts at 12.38 mm (approx. 1/2 in.)
from the top of the paper. The number 12.38 can be
changed from 10.0 to 181.36 by pressing the
1
key or the
2
key.
13 Setting the post-imprinter font style
• This setting can be done only when a post-
imprinter is installed.
Bold: 2-dots
font
Normal: 1-dot font that can increase the ink lifetime longer
than Bold fonts.
1 1 . P o s t
I m p r i n t
H o s t
Count
Host
1 2 . P o s t
P o s i t i o n
H o s t
1 2 . P o s t
P o s i t i o n
<
1 C h a r >
1 2 . 3 m m
Top of the paper
Top of the paper
Top of the
printout
ABCD
......
ABCD
......
Top of the
printout
10 mm (Default)
12.38 mm
Approx.
1/2 in.
Approx.
13/32 in.
1 3 . P o s t
F o n t
H o s t
Normal
Bold
Host
Summary of Contents for KV-S3105C
Page 6: ...Notice 6 Caution Labels...
