5.
Place the documents on the hopper (
1
) with the scanning side facing up.
•
Align the document position so that the center of the smallest sheet will be fed to the center of the paper
feed rollers (
2
). If the document is not properly aligned, the pages will not be fed correctly.
2
1
2
3
Notice
•
The height of the documents should not exceed the limit mark (
3
) on the document guide. This
may cause a paper jam or skew.
•
Depending on the types of paper, the document may not be fed smoothly. In such case, reduce
the number of sheets of the document.
•
The scanning width is different for the KV-S4065CL / KV-S4085CL and KV-S4065CW /
KV-S4085CW.
KV-S4065CL / KV-S4085CL: 227 mm (8.9 in.)
KV-S4065CW / KV-S4085CW: 302 mm (11.9 in.)
34
Operating Manual
Operation
