26
Using Push Scan
This scanner has a push scan function for starting scanning without operation through a computer.
■
Setting the scanning conditions
Scanning conditions are set on the setting screen of each application. For details about the setting screen of each
application, refer to the manual or help for that application.
Note
•
Press and hold the Start/Stop button for more than 2 seconds to open the application setting screen.
•
If the unit is in sleep mode, press any button (except the power button) on the scanner
’
s operation panel to return
to ready mode first.
■
Selecting the behavior of push scan
Select the behavior of push scan using the Scan Button Setting Tool.
1
Double click the (
) icon in the notification area of the task bar to open the Scan
Button Setting Tool.
•
In Windows 8, open the Scan Button Setting Tool on the Desktop screen.
2
Select [Touch Free Scanning] or [Single Touch Scanning].
Note
•
In Image Capture Plus and Scan Button Setting Tool, [Single Touch Scanning] means performing push
scanning using the 7-segment LED.
•
For details about the Scan Button Setting Tool, refer to the Scan Button Setting Tool help.
■
Performing push scan
Note
•
Register jobs in advance. For details about registering jobs, refer to the Image Capture Plus help.
1
Use or of the cursor button (
) to select a job.
2
Place the documents on the hopper tray.
•
When [Touch Free Scanning] is selected, scanning will start.
•
When [Single Touch Scanning] is selected, press the Start/Stop button (
) to start scanning.
1
2
1
2
