background image

Settings and Printing

19

NOTES:

If using the 

Network

 interface cable, be sure to connect 

the printer with a network interface cable and to turn it on.

If using the 

Parallel

 or 

USB

 interface cable, be sure to turn 

off the printer or not to connect the printer with an interface 
cable to avoid the Plug and Play installation.

For Windows

There are the following two methods to install the printer 
driver for Windows.

Automated Driver Installation

Custom Driver Installation

This Setup Guide only briefly explains 

Automated Driver 

Installation

. For detailed instructions, refer to the 

Installation

 section.

NOTE:

For Windows NT 4.0, Windows 2000, Windows XP and 
Windows Server 2003, make sure to log on as an 
administrator.

1

Insert the printer CD-ROM into the CD-ROM drive.
The CD-ROM launches automatically.

NOTE:

If the CD-ROM does not launch automatically, 
perform the following steps (1) - (2).
(1) Double-click the 

My computer

 icon.

(Windows XP / Windows Server 2003: 

Start

 - 

My Computer

)

(2) Double-click the CD-ROM icon.

2

Click 

Install Printer Driver

.

3

Click 

Automated Driver Installation

.

The 

License Agreement 

window is displayed.

4

Click 

[Yes]

.

The 

Printer port selection

 window is displayed.

5

[A] When using the Network interface cable:

Click on 

Select the Network port for KX-CL400

 

check button, and select the printer of the IP Address 
confirmed on the 

Configuration Page 

(refer to 

“Printing the Configuration Page” on page 17).

[B] When using the Parallel interface cable:

Click on 

Select an existing printer port

 check 

button, and click on the LPT port (Example: LPT1).

[C] When using the USB interface cable:

Click on 

Install via the USB port (plug and play 

installation)

 check button.

6

Click 

[Next>]

.

The 

Installed Options

 window is displayed.

7

Click on the check box of the installed options in your 
printer and select the total memory from the Memory 
list, and click 

[Next >]

.

The setup program starts installing the printer driver.

8

[A] When using the Network interface cable:

 

(1) Click 

[Finish]

.

[B] When using the Parallel interface cable:

 

(1) Click 

[Finish]

 and turn the printer on.

If the 

Welcome to the Found New Hardware 

Wizard

 window is displayed, refer to the 

Installation

 section.

[C] When using the USB interface cable:

 

NOTE:

For Windows 98, only Windows 98 SE is available 
when using a USB interface.

(1) When the 

Connect the printer to the computer

 

window is displayed, connect the USB interface 
cable and turn the printer on.

Perform the following steps depending on the 
operating system:
For Windows 98 / Windows Me:
(2) When the 

InstallShield Wizard Complete

 

window is displayed, click 

[Finish]

.

For Windows 2000:
(2) If the 

Digital Signature Not Found

 window is 

displayed, click 

[Yes]

.

The 

InstallShield Wizard Complete

 window is 

displayed.

(3) Click 

[Finish]

.

For Windows XP / Windows Server 2003:
(2) If the 

Welcome to the Found New Hardware 

Wizard

 window is displayed, refer to the 

Installation

 section.

(3) Click 

[Finish]

.

NOTE:

Restarting of the computer may be required 
depending on your computer environment. In this 
case, restart your computer.

For Windows (with Upgrade Kit)

When installing the printer driver for the printer equipped 
with the Upgrade Kit, use the printer CD-ROM provided 
with the Upgrade Kit.

The 

Automated Driver Installation

 is the same with the 

above steps. For detailed instructions, refer to the 

Installation

 section.

Installing Printer Driver

Se
ttings

 a

nd Pr

inting

Summary of Contents for KX-CL400

























Reviews: